... POSSIBLE: | - We want to be a market leader through quality. Being market leader is only possible: Complete coherence between quality requirements and | PCB PRODUCE | the quality aspects of product. This means to supply our customers with competitve and faultless products and services: - Constant optimization our our quality management | PCB PRODUCE | and quality assuring system. To improve the sense of responsibility and the ability ta act on its own according to our quality standards. - Reduction | PCB PRODUCE | of the production costs by promoting a preventive quality management system and by improving the controling measures that rule production and business processes. - Superiority | PCB PRODUCE | to the products of our competitors by guaranteiing the customer'requirements even under extreme conditions. - Superiority to the competitors in advisory services and precise delivery | PCB PRODUCE | on time. | FOR THE CONVERSION OF THIS QUALITY TERM WE SEIZED THE FOLLOWING MEASURES IN FOUR STRATEGIC SEGMENTS: | - Structure of optimally functioning | PCB PRODUCE | interface ...
[ Pcb Produce ]


... in a README file. The idea here is that the fabricator should be able to quickly understand what each file is and where it | PCB PRODUCE | goes in the stackup. If you wish to continue using Gerber data, switch to 274X. 274D is obsolete; the external aperture information is more cumbersome | PCB PRODUCE | and difficult for fabricators to deal with because they have to worry about translators and parsers to read the aperture table information. As a result, | PCB PRODUCE | aperture data might be misinterpreted. Worse, someone might have typed in the information manually - and erroneously. By contrast, in 274X, all the aperture information | PCB PRODUCE | is contained within the Gerber file, which can be read by most CAM tools automatically. For netlists, IPC-D-356 is the preferred format for fabrication. It's | PCB PRODUCE | widely used by many of the bare-board test-fixturing machines and is one of the only true ways to identify power- to-ground shorts. With the information | PCB PRODUCE | in this format coming directly from the engineering CAD system, there's no danger of the ...
[ Pcb Produce ]


... |Property of a material to reduce its viscosity under mechanical influence / shearing stress by means of pumping, stirring, squeegee pressure and to return | PCB PRODUCE | to its original conditions after the stress has finished. Screen- printing inks, for instance, have a very high thixotropy. On account of the squeegee pressure | PCB PRODUCE | and the movement the screen-printing ink becomes thinner and thus flows through the screen meshes onto the substrate to be coated. After lifting-off of the | PCB PRODUCE | screen/stencil the ink must "stand"; it has to achieve its original condition rapidly and must not flow anymore, which ensures a good edge coverage. | | PCB PRODUCE | TRACK / GAP: | Technical expression describing the minimum of conductor width (track or trace)  and the minimum Insulation width (gap) between two of them | PCB PRODUCE | on a printed circuit board. Track/gap helps to define the degree of difficulty in the production of pcb`s. Track/gap is mostly measured in micron or | PCB PRODUCE | in mil. | THROUGH CONNECTION | An electrical connection between ...
[ Pcb Produce ]